HOME > AYAHA HYBRID WOVEN FABRIC FOR CFRTP / FRTP

AYAHA HYBRID WOVEN FABRIC FOR CFRTP / FRTP

HYBRID WOVEN FABRIC is Woven Materials for CFRTP / FRTP !!

Choose BEST COMBINATION for your application!
Choose BEST COMBINATION for your application!
  • HYBRID
    Reinforcement
    CARBON
    ARAMID
    POLYARYLATE
    BASALT
    GLASS
    FLAX(Linen) ...
    &     Matrix
    PEEK PEI PPS
    PC TP Epoxy
    PA6 PA9T PA12
    PP PE PLA ...
    WOVEN FABRIC Not commingled yarn, but Co-Woven.
    0/90°Woven & UD structure, too.
    WEAVE Single Layer, Double Layer, Plain, Twill ...
  • AYAHA moldable HYBRID WOVEN FABRIC for FRTP is one united fabric made of two layer of different component; continuous Carbon fiber (or Aramid, Polyarylate, Basalt, Glass, or Flax) as reinforcement and thermoplastic yarn as matrix, for CFRTP (FRTP).
    It aims, only by heat compression in the mold, for both the impregnation of matrix resin into Carbon Fiber (or other yarns) and the shaping of CFRTP at the same time.

Characteristics

1. Flexible and soft material, and easily molded into the deep and difficult shape.

2. Possible to cut necessary length by scissors easily .

3. Package of this material is on roll, which is suitable for continuous production system.


※This material is designed for heat-compression molding, or autoclave.

※Heat shrinkage of matrix filament and carbon fiber filament is different, and the material should be pressed with certain power during heating process.


※As for other reinforcement yarn and/or matrix yarn, please contact us.

HBDL (Hybrid Double Layer Woven)
  • Reinforcement: Carbon Fiber (PAN), Aramid, Polyarylate, Flax(Linen) , Basalt, Glass, etc.
    Matrix: PA6, PA12, PA9T, PEEK, PEI, PPS, PC, PP, PE,TP Epoxy or other thermoplastic fibers.
    HBDL looks two sheets of fabric material, but is united with one fabric made of continuous Carbon Fiber (or Glass, Aramid, Flax, etc.) as reinforcement and thermoplastic filament as matrix for CFRTP.
    Vf ratio (reinforcement and matrix) can be modified, by the design of weaving structure and matrix yarn selection.

HB-UD (Hybrid UD) → HBSL-UD & HBDL-UD
  • Reinforcement: Carbon Fiber, Aramid, Polyarylate, Flax(Linen) , Basalt, Glass, etc.
    Matrix: PA6, PA12, PA9T, PEEK, PEI, PPS, PC, PP, PE,TP Epoxy or other thermoplastic fibers.
    As well as PAN and PITCH based Carbon fiber, Para-Aramid, H.T.Polyarylate, Basalt etc. can be woven into UD (Uni-directional) fabric for CFRTP.
    Single Layer structure (HBSL-UD) and Double layer structure (HBDL-UD) are available.
    HB-UD is simple woven fabric, but it can give materials specific directionality in case of laminated molding.

HYBRID FILAMENT Woven
  • HBFIL GF&PP, HBFIL GF&PA6, HBFIL PP&PE, HBFIL PET&Co-PET, HBFIL CF&PX
    "HYBRID FILAMENT" is hybrid yarn consisting of two different materials having different thermal properties. These hybrid filaments, used for our hybrid filaments woven, have been developed by the technology of yarn manufacturers.
    One material with higher melting point gives main mechanical strength, and another material with lower melting point functions as matrix.
    Each type of HYBRID FILAMENT can be woven to various fabric structures; not only plain or twill, but also double layer etc. by the request.

PAGE TOP